Electron and positron pair emission by low energy positron impact on surfaces

The emission of electron pairs from surfaces has the power to reveal details about the electron–electron interaction in condensed matter. This process, stimulated by a primary electron or photon beam, has been studied both in experiment and theory over the last two decades. An additional pathway, namely positron–electron pair emission, holds the promise to provide additional information. It is based on the notion that the Pauli exclusion principle does not need to be considered for this process.We have commissioned a laboratory based positron source and performed a systematic study on a variety of solid surfaces. In a symmetric emission geometry we can explore the fact that positron and electron are distinguishable particles. Following fundamental symmetry arguments we have to expect that the available energy is shared unequally among positron and electron. Experimentally we observe such a behavior for all materials studied. We find an universal feature for all materials in the sense that on average the positron carries a larger fraction of the available energy. This is qualitatively accounted for by a simplified scattering model. Numerical results, which we obtained by a microscopic theory of positron–electron emission from surfaces, reveal however that there are also cases in which the electron carries more energy. Whether the positron or the electron is more energetic depends on details of the bound electron state and of the emission geometry. The coincidence intensity is strongly material dependent and there exists an almost monotonic relation between the singles and coincidence intensity. These results resemble the findings obtained in electron and photon stimulated electron pair emission. An additional reaction channel is the emission of an electron pair upon positron impact. We will discuss the energy distributions and the material dependence of the coincidence signal which shows similar features as those for positron–electron pairs.     

具有聚集诱导发光特性的含氟有机金属配合物的研究进展

近年来,具有聚集诱导发光(aggregation-induced emission,AIE)特性的化合物由于在聚集态或固态发光量子效率较高而受到很多关注.含氟的功能化合物,由于氟原子的存在,往往具有独特的结构和物理、化学及生物学性质.根据中心金属和配体的种类,汇总了具有A IE性质的且含有氟代配体的有机金属配合物的研究进展.这些含氟有机金属配合物主要是铱、铂、金配合物,在发光器件、化学传感、细胞成像、数据存储等方面具有潜在应用.还简要讨论了相关研究的发展前景.     

9,10⁃二(N⁃苯基吲哚⁃3⁃乙烯基)蒽的合成及聚集诱导荧光和压致荧光变色性质

通过简单的Wittig反应合成了一个荧光化合物9,10-二(N-苯基吲哚-3-乙烯基)蒽(IA-Ph); 通过核磁共振和质谱对其结构进行了确认; 利用荧光发射光谱和紫外吸收光谱对其光物理性质进行了表征. 结果表明, 化合物IA-Ph兼具聚集诱导荧光(AIE)和压致荧光变色性质, 在相同浓度下, 该化合物在THF/H₂O(体积比1∶9)混合溶液中的荧光强度比在纯四氢呋喃(THF)溶液中增加了12倍, 具有明显的AIE效应. 通过简单而有效的机械力研磨, 化合物可以从初始的发绿光转变为研磨后的橙红光, 光谱红移约68 nm; 而且在加热或溶剂熏蒸条件下, 化合物的颜色可以回复到起始的绿光, 具有完全可逆性.     

Quinoline-based aggregation-induced delayed fluorescence materials for highly efficient non-doped organic light-emitting diodes

Three new emitters,namely 10,10'-(quinoline-2,8-diyl)bis(10 H-phenoxazine)(Fene),10,10'-(quinoline-2,8-diyl)bis(10 H-phenothiazine)(Fens) and 10,10'-(quinoline-2,8-diyl)bis(9,9-dimethyl-9,10-dihydroacridine)(Yad),featuring quinoline as a new electron acceptor have been designed and conveniently synthesized.These emitters possessed small singlet-triplet splitting energy(ΔEst) and twisted structures,which not only endowed them show thermally activated delayed fluorescence(TADF)properties but also afforded a remarkable aggregation-induced emission(AIE) feature.Moreover,they also showed aggregation-induced delayed fluorescence(AIDF) property and good photoluminescence(PL) property,which are the ideal emitters for non-doped organic light-emitting diodes(OLEDs).Furthermore,high-performance non-doped OLEDs based on Fene,Fens and Yad were achieved,and excelle nt maximum external quantum efficiencies(EQE_(max)) of 14,9%,13.1% and 17,4%,respectively,were obtained.It was also found that all devices exhibited relatively low turn-on voltages ranging from 3.0 V to3.2 V probably due to their twisted conformation and the AIDF properties.These results demonstrated the quinoline-based emitters could have a promising application in non-doped OLEDs.     

Mitochondrion-anchoring AIEgen with Large Stokes Shift for Imaging-guided Photodynamic Therapy

Photosensitizers that can target and accumulate in mitochondria are expected to achieve good therapeutic effects in photodynamic therapy,as mitochondria are the energy generation factory in cells.Herein,we designed and synthesized a novel mitochondrion-targeting photosensitizer TPC-Py with aggregation-induced emission characteristics for image-guided photodynamic therapy.TPC-Py possessed an efficient production of 1O2,with a quantum yield of 11.65%,upon mild white light irradiation(6 mW/cm²).TPC-Py exhibited good biocompatibility under dark condition,but showed remarkable cytotoxicity towards human cervical carcinoma(HeLa)cells with a half maximal inhibitory concentration(IC50)of 3.2μmol/L when exposed to white light irradiation(14.4 J/cm²).In addition,the Stokes shift of TPC-Py was as high as 150 nm,so that it could prevent self-absorption and increase the signal-to-noise ratio of fluorescence imaging.The excellent performance of TPC-Py makes it a promising candidate in imaging-guided clinical PDT for cancer in the near future.     

Donor-Acceptor Typed AIE Luminogens with Near-infrared Emission for Super-resolution Imaging

Aggregation-induced emission(AIE)luminogens(AIEgens)with high brightness in aggregates exhibit great potentials in biological imaging,but these AIEgens are seldom applied in super-resolution biological imaging,especially in the imaging by using the structural illumination microscope(SIM).Based on this consideration,we synthesized the donor-acceptor typed AIEgen of DTPA-BTN,which not only owns high brightness in the near-infrared(NIR)emission region from 600 nm to 1000 nm(photoluminescence quantum yield,PLQYs=11.35%),but also displays excellent photo-stability.In addition,AIE nanoparticles based on 4,7-ditriphenylamine-[1,2,5]-thiadiazolo[3,4-c]pyridine(DTPA-BTN)were also prepared with highly emissive features and excellent biocompatibility.Finally,the developed DTPA-BTN-based AIE nanoparticles were applied in the super-resolution cellular imaging via SIM,where much smaller full width at half-maximum values and high signal to noise ratios were obtained,indicating the superior imaging resolution.The results here imply that highly emissive AIEgens or AIE nanoparticles can be promising imaging agents for super-resolution imaging via SIM.     

State-crossing from a Locally Excited to an Electron Transfer State(SLEET) Model Rationalizing the Aggregation-induced Emission Mechanism of (Bi)piperidylanthracenes

Luminogens with aggregation-induced emission(AIE)characteristics(or AIEgens)have been widely used in various applications due to their excellent luminescent properties in molecular aggregates and the solid state.A deep understanding of the AIE mechanism is critical for the rational development of AIEgens.In this work,the“state-crossing from a locally excited to an electron transfer state”(SLEET)model is employed to rationalize the AIE phenomenon of two(bi)piperidylanthracenes.According to the SLEET model,an electron transfer(ET)state is formed along with the rotation of the piperidyl group in the excited state of(bi)piperidylan-thracene monomers,leading to fluorescence quenching.In contrast,a bright state exists in the crystal and molecular aggregates of these compounds,as the intermolecular interactions restrict the formation of the dark ET state.This mechanistic understanding could inspire the deployment of the SLEET model in the rational designs of various functional AIEgens.     

A Novel Fluorescent Probe for ATP Detection Based on Synergetic Effect of Aggregation-induced Emission and Counterion Displacement

In this work,a fluorescent probe(TPEBe-I)was developed for adenosine triphosphate(ATP)detection based on the synergetic effect of aggregation-induced emission and counterion displacement.TPEBe-I gave weak emission in aqueous solution due to the heavy-atom effect of counter iodide ion.However,upon the addition of ATP,the new aggregate complex(TPEBe-ATP)was formed between the cationic unit of TPEBe-I and ATP through electrostatic interactions,which not only restricted the intramolecular motion of luminogen but also eliminated the quenching effect of iodide ion.As a result,the fluorescent light-up detection for ATP was successfully achieved.Moreover,TPEBe-I exhibited high selectivity towards ATP and showed a wide linear detection region towards the logarithm of ATP concentration(5—600μmol/L)with a detection limit of 1.0μmol/L,enabling TPEBe-I as a promising probe for ATP quantitative analysis.     

Recent Process of Photo-responsive Materials with Aggregation-induced Emission

The research of photo-responsive materials, with changed absorption and emission under light stimulus, has drawn more and more attention due to their wide applications. However, most of them suffered from the notorious aggregation-caused quenching(ACQ) effect, which often led to the unconspicuous luminescent change in photo-responsive process. To solve this problem, the strategy of combining aggregation-induced emission(AIE) and photochromic properties was utilized, which largely enriched the phenomenon and application of photo-responsive materials. This short review summarized the recent progress of photo-responsive AIE materials with changed UV absorbance or PL phenomenon under UV-irradiation, including the types of molecular structures, internal mechanisms and the practical applications. Also, some outlooks were given on the further exploration of this field at the end of this paper.     

Recent Development of DNA-modified AIEgen Probes for Biomedical Application

A variety of DNA-based probes are utilized for the detections of multiple analytes and DNA nanotechnology has been thriving for recent decades and achieving numerous nanostructures,mainly focusing on DNA morphology modulation and multifunctional systems engineered into to the complicated works.Among the numerous detections,fluorescence method is a non-invasive,highly selective and sensitive means for varieties of applications,but their emissions are often compromised by the aggregation-caused quenching(ACQ)effect,which weakens their applications.The aggregation induced emission luminogens(AIEgens)are created with non emissive or weakly emissive in a low concentration but emit strong fluorescence in a high concentration with aggregated states.Herein,numerous functionalized AIEgens have been emerged and used for detection and imaging and DNA-modified AIEgen probes are introduced.In this vein,here we report the progress on DNA-modified AIEgen probes in recent years and highlight their conjugation strategies including covalent bonding,electrostatic interaction and their applications of biosensing.Moreover,multiple DNA strands are needed to introduce into the DNA-modified AIEgen probes for more purposes.At the end,some challenges are mentioned to discuss the new trend of DNA-modified AIEgen probes.